Suit winter membranes. Norfin ELEMENT GRAY -20° / 6000mm

The product is designed for operation at ambient temperatures down to -20°C. Top fabric: NORTEX BREATHHABLE - waterproof membrane fabric. The seams of the product are glued to improve the strength qualities and reduce the wettability. In the production of Nrfin Element Gray, THERMO GUARD insulation was used. The design uses reflective decorative elements that will allow you to be noticed even in the dark. The kit is quite light for its volume - the weight is only 2340 grams for the size M. "Breathable" qualities of the material - 2,000 g/m²/24 hours. Water resistance, according to the manufacturer - 6,000 mm.

The jacket is spacious, does not constrain movements - anatomical cut. The hood is of medium volume, roomy, fastened to the jacket with a zipper, has a voluminous, glued, slightly rigid visor. It will conveniently protect from the bright sun shining into the eyes, cover from raindrops and strong winds on the face.

The hood is removable, insulated, with a soft inner lining, adjustable with two drawstring cords along the oval of the face. The petals of the hood are fixed with Velcro, covering the lower part of the face. The collar is voluminous, insulated with fleece, up to the level of the cheekbones, it conveniently covers the neck and face from the chilling wind. The front part of the collar has a recess for the chin, which can be covered by the petals of the worn and buttoned hood. The latter is of sufficient volume - it will be convenient to put on a hat.

Jacket fastener with a tractor zipper with two runners and a two-sided windproof strip that securely closes the zipper from the penetration of wind and moisture. Velcro strips are fixed with additional fixation on buttons. The part of the jacket facing the body is lined with fleece up to waist level, and below it is finished with polyester.

Sleeve cuff is straight. The volume of the sleeves on the wrist is regulated with Velcro. There is an internal recessed cuff for putting on a high glove or mitten. The design of the sleeve prevents inflating, moisturizing. It turns out a completely closed knot from water, snow and icy wind.

Seven pockets have been developed for the Norfin jacket: two upper outer pockets with waterproof zippers for warming hands, two lower outer cargo pockets with Velcro flaps, two additional open pockets located below them - all pockets have fleece insulation. There is one inner left pocket with a zipper located under the insulation - convenient for a mobile phone and documents. There are drawstrings at the bottom of the jacket and at the waist to tighten the extra volume.

The high semi-overall is equipped with wide straps adjustable in length with locks. The high back of the overalls reliably covers the angler's back from the cold and waterlogging. The jumpsuit is fastened in front with a tractor zipper with two sliders. The design allows you to open the zipper not only from above, but also from below. Bilateral wind-shelter levels reliably cover a lightning from cold wind and moisture, are fixed on flypapers. The lining of the overalls is smooth polyester. There is a wide elastic band at the waist.

The bib has four pockets: two cargo pockets of medium depth are located in the front in the hip area with Velcro flaps, underneath are two open pockets lined with soft fleece. The cut of the knee zones of the product is ergonomic - it takes into account the possibility of bending the knees without excessive tension on the fabrics of the product.

A wide fabric insert is located along the lower side surface of the trousers. The height of the insert to the knee allows you to open the leg wide when putting on the boots, after which it closes with a tractor zipper and is additionally fixed along the bottom with a Velcro patch that can be pulled up to the volume of the boots. .